HARP TUNING PINS (PEGS)

 

Our Standard #4 or #5 taper pins

Standard Concert Heads .185" -  .26" long heads

2" to 4" long in 1/4" increments

#4 pins have .076" string hole standard/ #5 pins have .094" string hole standard

Black Oxide Finish Standard

1 - 99                                 $1.70 each

100 - 249                               $1.50 each

250 - 999                               $1.30 each

1000+                                    $1.20 each

 #6 available for $1.00 each above normal rate

#3 tuning pins are available as special order (zither heads suggested)

 

Tuning key head sizes:

Standard size--Concert Harp  .185"

Robinsons #5 (Drum Key)  .210"

Robinson #4  & Dusty Strings Harps (#11 Clock Key)   .175"

Zither pin & Triplett Harps  .160"

String hole sizes :  .094" or .076"

Stainless Steel, Aluminum, and Machine Brass Pins Available for an Additional Charge

Alloys Used:

Steel -  12L14

Stainless Steel -  303/304 or 316 depending on order

Machine Brass -  360 Half Hard

Aluminum -  6061-T6511

Stainless Steel, Aluminum, and Brass pins start at $4 each and go up to $10 each depending on size (4-8 weeks)

Yellow Zinc, Nickel, or Brass plating available (2-4 weeks)

Different size key heads besides Standard Concert Harp size (.185") have an additional setup cost of $25 for quantities less than 250

Different size string holes and placement available at an additional cost

 

Zither Pins

1 - 99                 $.50 each

100 - 250             $.45 each

250+                   $.40 each